Reference Guide

Quality of Service (QoS) | 477
rate-police
Specify the policing functionality on incoming traffic.
Syntax
rate-police [kbps] committed-rate [burst-KB] [peak [kbps] peak-rate [burst-KB]]
Parameters
Defaults
Burst size is 100 KB. peak-rate is by default the same as committed-rate. Granularity for
committed-rate and peak-rate is Mbps unless the kbps option is used.
Command Modes
QOS-POLICY-IN
Command
History
Related
Commands
rate-shape
Shape traffic output as part of the designated policy.
Syntax
rate-shape [kbps] rate [burst-KB]
Parameters
Defaults
Burst size is 50 KB. Granularity for rate is Mbps unless the kbps option is used.
Command Modes
QOS-POLICY-OUT
kbps
Enter this keyword to specify the rate limit in Kilobits per second (Kbps). On MXL
Switch, make the following value a multiple of 64. The default granularity is
Megabits per second (Mbps).
Range: 0-40000000 (Kbps)
committed-rate
Enter the committed rate in Mbps.
Range: 0 to 10000 Mbps
burst-KB
(OPTIONAL) Enter the burst size in KB.
Range: 16 to 200000 KB
Default: 100 KB
peak peak-rate
(OPTIONAL) Enter the keyword peak followed by the peak rate in Mbps.
Range: 0 to 10000 Mbps
Default: Same as designated for
committed-rate
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
rate police Specifies traffic policing on the selected interface.
qos-policy-input Creates a QoS output policy.
kbps
Enter this keyword to specify the rate limit in Kilobits per second (Kbps). On
MXL Switch, make the following value a multiple of 64. The default granularity
is Megabits per second (Mbps).
Range: 0-40000000 (Kbps)
rate
Enter the outgoing rate in multiples of 10 Mbps.
Range: 10 to 10000
burst-KB
(OPTIONAL) Enter a number as the burst size in KB.
Range: 0 to 10000
Default: 50