Reference Guide

462 | Quality of Service (QoS)
www.dell.com | support.dell.com
service-class dot1p-mapping
This command maps an 802.1p priority to an internal traffic class.
Syntax
service-class dot1p-mapping user-priority trafficclass
The user-priority value can range from 0-7 and traffic class can range from 0-6.
The no form of this command is not supported.
Command Modes
CONFIGURATION
Command
History
Per-Port QoS Commands
Per-port QoS (“port-based QoS”) allows users to defined QoS configuration on a per-physical-port
basis. The commands include:
• dot1p-priority
• rate police
• rate shape
• service-class dynamic dot1p
• strict-priority unicast
dot1p-priority
Assign a value to the IEEE 802.1p bits on the traffic received by this interface.
Syntax
dot1p-priority priority-value
To delete the IEEE 802.1p configuration on the interface, use the no dot1p-priority command.
Parameters
Defaults
none
Command Modes
INTERFACE
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
priority-value
Enter a value from 0 to 7.
dot1p Queue Number
00
10
20
31
42
53
63
73