Reference Guide

Multiple Spanning Tree Protocol (MSTP) | 383
tc-flush-standard
Enable the MAC address flushing after receiving every topology change notification.
Syntax
tc-flush-standard
To disable, use the no tc-flush-standard command.
Defaults
Disabled
Command Modes
CONFIGURATION
Command
History
Usage
Information
By default, FTOS implements an optimized flush mechanism for MSTP. This helps in flushing the
MAC addresses only when necessary (and less often) allowing for faster convergence during topology
changes. However, if a standards-based flush mechanism is needed, you can turn on the knob
command to enable flushing MAC addresses after receiving every topology change notification.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module