Reference Guide

350 | Layer 2
www.dell.com | support.dell.com
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 18-6. show vlan Command Example
id vlan-id (OPTIONAL) Enter the keyword id followed by a number from 1 to 4094. Only
information on the VLAN specified is displayed.
name
vlan-name
(OPTIONAL) Enter the keyword
name followed by the name configured for the VLAN.
Only information on the VLAN named is displayed.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
Table 18-3. show vlan Command Information
Column Heading Description
(Column 1 — no heading) asterisk symbol (*) = Default VLAN
G = GVRP VLAN
P = primary VLAN
C = community VLAN
I = isolated VLAN
NUM Displays existing VLAN IDs.
Status
Displays the word
Inactive for inactive VLANs and the word
Active for active VLANs.
Q
Displays G for GVRP tagged, M for member of a VLAN-Stack VLAN, T
for tagged interface, U (for untagged interface), x (uncapitalized x) for
Dot1x untagged, or
X (capitalized X) for Dot1x tagged.
Ports
Displays the type, slot, and port information. For the type, Po = port
channel,
Fo= fortygigabit ethernet, and Te = ten gigabit ethernet.
FTOS#show vlan
Codes: * - Default VLAN, G - GVRP VLANs, R - Remote Port Mirroring VLANs, P -
Primary, C - Community, I - Isolated
Q: U - Untagged, T - Tagged
x - Dot1x untagged, X - Dot1x tagged
G - GVRP tagged, M - Vlan-stack, H - VSN tagged
i - Internal untagged, I - Internal tagged, v - VLT untagged, V - VLT tagged
NUM Status Description Q Ports
1 Inactive a
2 Inactive
* 20 Active U Te 0/3,5,13,53-56
1002 Active T Te 0/3,13,55-56
FTOS#