Reference Guide

iSCSI Optimization | 327
Example
Figure 16-1. show iscsi Command Example
Related
Commands
show iscsi sessions
Display information on active iSCSI sessions on the switch.
Syntax
show iscsi sessions
Command Mode
EXEC
EXEC Privilege
Command
History
Example
Figure 16-2. show iscsi sessions Command Example
Related
Commands
FTOS# show isci
iSCSI is enabled
iSCSI COS : dot1p is 4 no-remark
Session aging time: 10
Maximum number of connections is 256
------------------------------------------------
iSCSI Targets and TCP Ports:
------------------------------------------------
TCP Port Target IP Address
3260
860
show iscsi sessions Display information on active iSCSI sessions on the switch.
show iscsi sessions detailed Display detailed information on active iSCSI sessions on the switch.
show run iscsi show run iscsi
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
FTOS# show isci sessions
Session 0:
-------------------------------------------------------------------------------
----------
Target: iqn.2001-05.com.equallogic:0-8a0906-0e70c2002-10a0018426a48c94-iom010
Initiator: iqn.1991-05.com.microsoft:win-x9l8v27yajg
ISID: 400001370000
Session 1:
-------------------------------------------------------------------------------
----------
Target: iqn.2001-05.com.equallogic:0-8a0906-0f60c2002-0360018428d48c94-iom011
Initiator: iqn.1991-05.com.microsoft:win-x9l8v27yajg
ISID: 400001370000.
show iscsi Display the currently configured iSCSI settings.
show iscsi sessions detailed Display detailed information on active iSCSI sessions on the switch.
show run iscsi show run iscsi