Reference Guide

GARP VLAN Registration (GVRP) | 223
Example
Figure 12-1. show garp timers Command Example
Related
Commands
show gvrp
Display the GVRP configuration.
Syntax
show gvrp [brief | interface]
Parameters
Defaults
none
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 12-2. show gvrp brief Command Example
Usage
Information
If no ports are GVRP participants, the message output changes from:
GVRP Participants running on <port_list>
FTOS#show garp timers
GARP Timers Value (milliseconds)
----------------------------------------
Join Timer 200
Leave Timer 600
LeaveAll Timer 10000
FTOS#
garp timers Sets the intervals (in milliseconds) for sending GARP messages.
brief (OPTIONAL) Enter the keyword brief to display a brief summary of the GVRP
configuration.
interface
(OPTIONAL) Enter the following keywords and slot/port or number information:
• For a Port Channel interface, enter the keyword
port-channel followed by a
number: Range: 1-128
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the
slot/port information.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
R3#show gvrp brief
GVRP Feature is currently enabled.
Port GVRP Status Edge-Port
-------------------------------------------------------
Te 3/0 Disabled No
Te 3/1 Disabled No
Te 3/2 Enabled No
Te 3/3 Disabled No
Te 3/4 Disabled No
Te 3/5 Disabled No
Te 3/6 Disabled No
Te 3/7 Disabled No
Te 3/8 Disabled No
R3#show gvrp brief