Reference Guide

Data Center Bridging | 181
Remote is enabled,
Priority list
Remote Willing Status is
enabled
Operational status (enabled or disabled) of peer device for DCBX exchange of PFC
configuration with a list of the configured PFC priorities. Willing status of peer
device for DCBX exchange (Willing bit received in PFC TLV): enabled or
disabled.
Local is enabled DCBX operational status (enabled or disabled) with a list of the configured PFC
priorities.
Operational status (local
port)
Port state for current operational PFC configuration:
• Init: Local PFC configuration parameters were exchanged with the peer.
• Recommend: Remote PFC configuration parameters were received from the
peer.
• Internally propagated: PFC configuration parameters were received from the
configuration source.
PFC DCBX Oper status Operational status for the exchange of the PFC configuration on the local port:
match (up) or mismatch (down).
State Machine Type Type of state machine used for DCBX exchanges of the PFC parameters:
Feature - for legacy DCBX versions; Symmetric - for an IEEE version.
TLV Tx Status Status of the PFC TLV advertisements: enabled or disabled.
PFC Link Delay Link delay (in quanta) used to pause specified priority traffic.
Application Priority TLV:
FCOE TLV Tx Status
Status of FCoE advertisements in application priority TLVs from the local DCBX
port: enabled or disabled.
Application Priority TLV:
SCSI TLV Tx Status
Status of ISCSI advertisements in application priority TLVs from the local DCBX
port: enabled or disabled.
Application Priority TLV:
Local FCOE Priority Map
Priority bitmap used by the local DCBX port in FCoE advertisements in application
priority TLVs.
Application Priority TLV:
Local ISCSI Priority Map
Priority bitmap used by the local DCBX port in ISCSI advertisements in application
priority TLVs.
Application Priority TLV:
Remote FCOE Priority
Map
Status of FCoE advertisements in application priority TLVs from the remote peer
port: enabled or disabled.
Application Priority TLV:
Remote ISCSI Priority
Map
Status of iSCSI advertisements in application priority TLVs from the remote peer
port: enabled or disabled.
PFC TLV Statistics: Input
TLV pkts
Number of PFC TLVs received.
PFC TLV Statistics:
Output TLV pkts
Number of PFC TLVs transmitted.
PFC TLV Statistics: Error
pkts
Number of PFC error packets received.
PFC TLV Statistics: Pause
Tx pkts
Number of PFC pause frames transmitted.
PFC TLV Statistics: Pause
Rx pkts
Number of PFC pause frames received.
Table 9-4. show interfaces pfc summary Command Example Fields (continued)
Field Description