Reference Guide

104 | Access Control Lists (ACL)
www.dell.com | support.dell.com
Defaults
Not configured
Command Modes
CONFIGURATION-IP ACCESS-LIST-EXTENDED
Command
History
Usage
Information
The order option is relevant in the context of the Policy QoS feature only. For more information, refer
to the Quality of Service (QoS) chapter of the FTOS Configuration Guide.
Table 6-2 lists the keywords displayed in the CLI help and their corresponding ICMP message type
name.
message-type
(OPTIONAL) Enter an ICMP message type, either with the type (and code, if
necessary) numbers or with the name of the message type (ICMP message types are
listed in Table 6-2).
Range: 0 to 255 for ICMP type; 0 to 255 for ICMP code
count (OPTIONAL) Enter the keyword count to count packets processed by the filter.
byte (OPTIONAL) Enter the keyword byte to count bytes processed by the filter.
order (OPTIONAL) Enter the keyword order to specify the QoS priority for the ACL entry.
Range: 0-254 (where 0 is the highest priority and 254 is the lowest; lower order
numbers have a higher priority)
Default: If the order keyword is not used, the ACLs have the lowest order by default
(255).
fragments
Enter the keyword fragments to use ACLs to control packet fragments.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
Table 6-2. ICMP Message Type Keywords
Keyword ICMP Message Type Name
administratively-prohibited Administratively prohibited
alternate-address Alternate host address
conversion-error Datagram conversion error
dod-host-prohibited Host prohibited
dod-net-prohibited Net prohibited
echo Echo
echo-reply Echo reply
general-parameter-problem Parameter problem
host-isolated Host isolated
host-precedence-unreachable Host unreachable for precedence
host-redirect Host redirect
host-tos-redirect Host redirect for TOS
host-tos-unreachable Host unreachable for TOS
host-unknown Host unknown
host-unreachable Host unreachable
information-reply Information replies
information-request Information requests