Users Guide

Using a Flash Memory Card | 41

Using a Flash Memory Card

This appendix provides information about using an external flash memory card and contains the

following sections:

• External Flash Memory Card Overview

• Formatting an External Flash Card

• Inserting the External Flash Memory Card

• Removing the External Flash Memory Card

• Copying Files to the External Flash

• Displaying Files Stored on the External Flash

External Flash Memory Card Overview

Each RPM card is designed with a slot to accommodate an external flash memory card (slot0:). You can

use a flash card to copy the image and configuration files for storage and backup purposes. For complex

configurations, use the copies for other E-Series systems in your network. Configure your boot execution

process to use the images stored on a flash card as the primary (active), secondary (standby), or default

boot order preference. Optional external flash memory cards are shipped blank.

Inserting the External Flash Memory Card

NOTE: Only insert the external flash before system boot or after the system has completed its boot and is run-

time mode.

To install the flash memory card:

Removing the External Flash Memory Card

To remove the flash memory card:

Step Task

1 Press the ejector button to ensure it is in the extended position. Hold the flash card vertically (with the manufacturers

able on the left and the barcode on the right).

2 Gently insert the flash card into the primary RPM flash slot until the is card is flush with the front panel. Do not

force the flash card into the slot.

3 The In Use LED illuminates only during read or write operations.

Step Task

1 Extend the ejector button by pressing the ejector button. Then press the ejector button again to eject the memory

card.

2 Remove the card and store it in an antistatic bag.