Users Guide

38 | RPM Ports and Cables
www.dell.com | support.dell.com
Connecting to the 10/100 Ethernet Management Port
Configure the 10/100 Ethernet management port, labeled 10/100 Ethernet on the primary RPM card in to
obtain network access to the chassis for management functions like upgrading the FTOS image.
DTR 2 7 20 DTR
TxD 3 6 3 TxD
GND 4 5 7 GND
GND 5 4 7 GND
RxD 6 3 2 RxD
DSR 7 2 8 DCD
CTS 8 1 5 CTS
Table 8-6. 10/100 Ethernet Management Port LEDs
Label Description
L (Link) Lit: Link is up.
Unlit: No connection
A (Activity) Lit: Activity on port.
Unlit: No activity
Table 8-5. RJ-45 to DB-25 Adapter Pin Assignments
E-Series
Auxiliary Port
RJ-45 to RJ-45 Rollover Cable RJ-45 to DB-25
Modem Adapter
Modem
Signal RJ-45 Pinout RJ-45 Pinout DB-45 Pinout Signal