Users Guide

12 | The E600i System
www.dell.com | support.dell.com
Install the E600i Chassis
To install the E600i system:
Cable management system 0 1 Y
Cable management system cover 0 1 Y
Step Task Section
1 Prepare the installation site. Site Preparation
2 Unpack the chassis and components Unpack the System Components
3 Mount the chassis in a rack or cabinet. Mount the Chassis in a Rack
Mount the Chassis in a Cabinet
4 Install the fan tray. Install the Fan Tray
5 Install the power supplies, AC or DC. Install the AC Power Supply Units
Install the DC PEMs
6 Install the RPMs, line cards, and SFMs. Install RPMs, Line Cards, and SFMs
7 Connect network cable RPM Ports and Cables
8 Supply power to the chassis
Table 2-1. E600i System Component Requirements
Component Minimum Maximum Field-Replaceable