Command Line Reference Guide

922 | Multicast
www.dell.com | support.dell.com
Command Modes
EXEC
EXEC Privilege
Command
History
Example 1
(static)
FTOS#show ip mroute static
Mroute: 23.23.23.0/24, interface: Lo 2
Protocol: static, distance: 0, route-map: none, last change: 00:00:23
Example 2
(snooping)
FTOS#show ip mroute snooping
IPv4 Multicast Snooping Table
(*, 224.0.0.0), uptime 17:46:23
Incoming vlan: Vlan 2
Outgoing interface list:
GigabitEthernet 4/13
(*, 225.1.2.1), uptime 00:04:16
Incoming vlan: Vlan 2
Outgoing interface list:
GigabitEthernet 4/11
GigabitEthernet 4/13
(165.87.1.7, 225.1.2.1), uptime 00:03:17
Incoming vlan: Vlan 2
Outgoing interface list:
GigabitEthernet 4/11
GigabitEthernet 4/13
GigabitEthernet 4/20
Example 3
(show ip mroute)
FTOS#show ip mroute
IP Multicast Routing Table
(*, 224.10.10.1), uptime 00:05:12
count (OPTIONAL) Enter the keyword count to view the number of multicast routes and
packets on the E-Series.
snooping
[vlan vlan-id]
[group-address
[source-address]]
(OPTIONAL) E-Series ExaScale only:
Enter the keyword snooping to display information on the multicast routes
discovered by PIM-SM snooping.
Enter a VLAN ID to limit the information displayed to the multicast routes
discovered by PIM-SM snooping on a specified VLAN. Valid VLAN IDs: 1 to
4094.
Enter a multicast group address and, optionally, a source multicast address in dotted
decimal format (A.B.C.D) to limit the information displayed to the multicast routes
discovered by PIM-SM snooping for a specified multicast group and source.
summary (OPTIONAL) Enter the keyword summary to view routes in a tabular format.
Version 8.4.1.1 Support for the snooping keyword and optional vlan vlan-id, group-address, and
source-address parameters were added on E-Series ExaScale.
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
E-Series legacy command