Command Line Reference Guide

916 | Multicast
www.dell.com | support.dell.com
Command
History
Related
Commands
clear ip mroute snooping
e
x
Clear the multicast routes learned through PIM-SM snooping from the IPv4 multicast snooping table.
To clear tree information learned through PIM-SM snooping from the PIM tree information base, use
clear ip pim snooping tib command.
Syntax
clear ip mroute snooping {vlan vlan-id [group-address [source-address] | *}
Parameters
Command Modes
EXEC Privilege
Command
History
Related
Commands
ip mroute
c e s
Assign a static mroute.
Syntax
ip mroute destination mask {ip-address | null 0| {{bgp| ospf} process-id | isis | rip | static}
{ip-address | tag | null 0}} [distance]
To delete a specific static mroute, use the command ip mroute destination mask {ip-address | null
0| {{bgp| ospf} process-id | isis | rip | static} {ip-address | tag | null 0}} [distance].
To delete all mroutes matching a certain mroute, use the no ip mroute destination mask command.
Parameters
Version 7.8.1.0 Introduced on C-Series
E-Series legacy command
show ip pim tib Show the PIM Tree Information Base.
vlan vlan-id Enter a VLAN ID to clear information learned through PIM-SM snooping about a
specified VLAN. Valid VLAN IDs: 1 to 4094.
group-address
[source-address]
(OPTIONAL) Enter a group address and, optionally, a source address in dotted
decimal format, to clear information learned through PIM-SM snooping about a
specified multicast group and source.
* Enter * to clear all multicast routes learned through PIM-SM snooping.
Version 8.4.1.1 Introduced on E-Series ExaScale
show ip pim snooping tib Display the information from the PIM tree information base learned through PIM
snooping.
show ip pim tib Show the PIM Tree Information Base.
destination
Enter the IP address in dotted decimal format of the destination device.
mask
Enter the mask in slash prefix formation ( /x ) or in dotted decimal format.
null 0
(OPTIONAL) Enter the null followed by zero (0).