Command Line Reference Guide

898 | Multicast Source Discovery Protocol (MSDP)
www.dell.com | support.dell.com
ip msdp shutdown
e
Administratively shut down a configured MSDP peer.
Syntax
ip msdp shutdown {peer address}
Parameters
Defaults
Not configured
Command Modes
CONFIGURATION
Command
History
ip multicast-msdp
e
Enable MSDP.
Syntax
ip multicast-msdp
To exit MSDP, use the no ip multicast-msdp command.
Defaults
Not configured
Command Modes
CONFIGURATION
Command
History
show ip msdp
e
Display the MSDP peer status, SA cache, or peer summary.
Syntax
show ip msdp {peer peer address | sa-cache | summary}
Parameters
Defaults
Not configured
Command Modes
EXEC
EXEC Privilege
Command
History
peer address
Enter the peer address in a dotted decimal format (A.B.C.D.)
Version 6.2.1.1 Introduced
Version 6.2.1.1 Introduced
peer peer address Enter the keyword peer followed by the peer address in a dotted decimal format
(A.B.C.D.)
sa-cache Enter the keyword sa-cache to display the Source-Active cache.
summary Enter the keyword summary to display a MSDP peer summary.
Version 6.2.1.1 Introduced