Command Line Reference Guide

888 | Multicast Listener Discovery (MLD)
www.dell.com | support.dell.com
ipv6 mld snooping querier
e
Enable the MLD querier processing for the VLAN interface.
Syntax
ipv6 mld snooping querier
To disable the querier feature, use the no ipv6 mld snooping querier command.
Defaults
Disabled
Command Modes
INTERFACE VLAN (conf-if-vl-n)
Command
History
Usage
Information
This command enables the VLAN to send out periodic queries as a proxy querier. You must configure
and IP address for the VLAN.
show ipv6 mld snooping groups
e
Display the IPv6 MLD Snooping group information.
Syntax
show ipv6 mld snooping groups [group-address] [explicit] [link-local] [summary] [vlan]
Parameters
Defaults
No default values or behavior
Command Modes
EXEC
EXEC Privilege
Command
History
Example FTOS#show ipv6 mld snooping groups summary
MLD snooping connected groups summary:
(*,G) routes :12
FTOS#
Version 7.4.1.0 Introduced
group-address (OPTIONAL) Enter the multicast group address in the x:x:x:x::x format.
The
:: notation specifies successive hexadecimal fields of zero.
explicit (OPTIONAL) Enter the keyword explicit to display explicit tracking information.
link-local (OPTIONAL) Enter the keyword link-local to display link local groups.
summary (OPTIONAL) Enter the keyword summary to display a summary of groups.
vlan (OPTIONAL) Enter the keyword vlan followed by the VLAN number to display
information on that specific VLAN.
Range: 1 - 4094
Version 7.4.1.0 Introduced