Command Line Reference Guide

884 | Multicast Listener Discovery (MLD)
www.dell.com | support.dell.com
Command Modes
EXEC
EXEC Privilege
Command
History
Example FTOS#show ipv6 mld groups vlan 100 link-local ?
detail Detailed information
| Pipe through a command
<cr>
===========================================================================
show ipv6 mld groups explicit
Interface GigabitEthernet 2/14, Group ff02::1:ff00:0
Reporter fe80::200:ff:fe00:0
Uptime 00:00:19, Expires in 00:04:00
Mode EXCLUDE
Interface GigabitEthernet 2/14, Group ff02::1:ff00:5
Reporter fe80::200:ff:fe00:0
Uptime 00:00:19, Expires in 00:04:00
Mode EXCLUDE
Interface GigabitEthernet 2/14, Group ff3e:100::4000:1
Reporter fe80::200:ff:fe00:0
Uptime 00:00:16, Expires in 00:04:03
Mode INCLUDE
165:87:32::8
165:87:32::9
165:87:32::a
Interface GigabitEthernet 2/14, Group ff3e:100::4000:2
Reporter fe80::200:ff:fe00:0
Uptime 00:00:16, Expires in 00:04:03
Mode INCLUDE
165:87:32::8
165:87:32::9
165:87:32::a
[output omitted]
show ipv6 mld interface
e
View the configured MDL interfaces.
Syntax
show ipv6 mld interface [interface]
Parameters
Version 7.4.1.0 Introduced
interface
[interface]
Enter the keyword interface to display the configured MDL interfaces. Optionally, enter the
keyword
interface followed by one of the keywords below, with slot/port or number
information, to display information for that specific interface:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/
port information.
• For a Port Channel interface, enter the keyword
port-channel followed by a number:
E-Series Range: 1 to 255 for TeraScale and 1 to 512 for ExaScale.
• For a SONET interface, enter the keyword
sonet followed by the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by
the slot/port information.
• For a VLAN, enter the keyword
vlan followed by a number from 1 to 4094.