Command Line Reference Guide

Multicast Listener Discovery (MLD) | 879
34
Multicast Listener Discovery (MLD)
Overview
The platforms on which a command is supported is indicated by the character — e for the E-Series,
c for the C-Series, and s for the S-Series — that appears below each command heading.
This chapter contains the following sections:
• MLD Commands
• MLD Snooping Commands
MLD Commands
The MLD commands are:
• clear ipv6 mld groups
• debug ipv6 mld
• ipv6 mld explicit-tracking
• ipv6 mld last-member-query-interval
• ipv6 mld querier-timeout
• ipv6 mld query-interval
• ipv6 mld query-max-resp-time
• ipv6 mld static-group
• ipv6 mld version
• show ipv6 mld interface
clear ipv6 mld groups
e
Clear entries from the group cache table.
Syntax
clear ipv6 mld groups [interface | group-address]
Parameters
interface
(OPTIONAL) Enter the following keywords and slot/port or number information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by
the slot/port information.
• For a Port Channel interface, enter the keyword port-channel followed by a number:
E-Series Range: 1 to 255 for TeraScale and 1 to 512 for ExaScale.
• For a SONET interface, enter the keyword
sonet followed by the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
followed by the slot/port information.
• For a VLAN, enter the keyword vlan followed by a number from 1 to 4094.
group-address (OPTIONAL) Enter the group address in the x:x:x:x::x format.
The
:: notation specifies successive hexadecimal fields of zero.