Command Line Reference Guide

Link Layer Detection Protocol (LLDP) | 865
advertise management
c e s
Advertise management TLVs (Type, Length, Value).
Syntax
advertise management -tlv {system-capabilities | system-description | system-name}
To remove advertised management TLVs, use the no advertise management -tlv
{system-capabilities | system-description | system-name} command.
Parameters
Defaults
No default values or behavior
Command Modes
CONFIGURATION (conf-lldp)
Command
History
Usage
Information
All three command options — system-capabilities, system-description, and system-name} —
-can be invoked individually or together, in any sequence.
clear lldp counters
c e s
Clear LLDP transmitting and receiving counters for all physical interfaces or a specific physical
interface.
Syntax
clear lldp counters interface
Parameters
Defaults
No default values or behavior
Command Modes
EXEC Privilege
Command
History
system-capabilities Enter the keyword system-capabilities to advertise the system capabilities TLVs.
system-description Enter the keyword system-description to advertise the system description TLVs.
system-name Enter the keyword system-description to advertise the system description TLVs.
Version 7.7.1.0 Introduced on S-Series
Version 7.6.1.0 Introduced on C-Series
Version 7.4.1.0 Introduced on E-Series
interface
Enter the following keywords and slot/port or number information:
• For a Fast Ethernet interface, enter the keyword
FastEthernet followed by the slot/
port information.
• For a 1-Gigabit Ethernet interface, enter the keyword
gigabitEthernet followed by
the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword tenGigabitEthernet
followed by the slot/port information.
Version 7.7.1.0 Introduced on S-Series
Version 7.6.1.0 Introduced on C-Series
Version 7.4.1.0 Introduced on E-Series