Command Line Reference Guide

858 | Layer 2
www.dell.com | support.dell.com
T Gi 0/2
C 101 Inactive T Gi 0/3
I 102 Inactive T Gi 0/4
FTOS#
Example 2
(show vlan id)
FTOS# show vlan id 40
Codes: * - Default VLAN, G - GVRP VLANs
Q: U - Untagged, T - Tagged
x - Dot1x untagged, X - Dot1x tagged
G - GVRP tagged, M - Vlan-stack
NUM Status Description Q Ports
40 Active M Gi 13/47
FTOS#show vlan id 41
Codes: * - Default VLAN, G - GVRP VLANs
Q: U - Untagged, T - Tagged
x - Dot1x untagged, X - Dot1x tagged
G - GVRP tagged, M - Vlan-stack
NUM Status Description Q Ports
41 Active T Gi 13/47
FTOS#show vlan id 42
Codes: * - Default VLAN, G - GVRP VLANs
Q: U - Untagged, T - Tagged
x - Dot1x untagged, X - Dot1x tagged
G - GVRP tagged, M - Vlan-stack
NUM Status Description Q Ports
42 Active U Gi 13/47
FTOS#
Table 32-89. show vlan Information
Column Heading Description
(Column 1 — no heading) asterisk symbol (*) = Default VLAN
G = GVRP VLAN
P = primary VLAN
C = community VLAN
I = isolated VLAN
NUM Displays existing VLAN IDs.
Status
Displays the word
Inactive for inactive VLANs and the word Active for
active VLANs.
Q
Displays G for GVRP tagged, M for member of a VLAN-Stack VLAN, T for
tagged interface,
U (for untagged interface), x (uncapitalized x) for Dot1x
untagged, or X (capitalized X) for Dot1x tagged.
Ports
Displays the type, slot, and port information. For the type,
Po = port channel, Gi
= gigabit ethernet, and Te = ten gigabit ethernet.