Command Line Reference Guide

Layer 2 | 847
show cam mac stack-unit
s
Display the Content Addressable Memory (CAM) size and the portions allocated for MAC addresses
and for MAC ACLs.
Syntax
show cam mac stack-unit unit_number port-set port-pipe count [vlan vlan-id] [interface
interface]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
stack-unit unit_number (REQUIRED) Enter the keyword linecard followed by a stack member
number to select the linecard for which to gather information.
S-Series Range: 0 to 1
port-set port-pipe (REQUIRED) Enter the keyword port-set followed by a Port-Pipe number to
select the Port-Pipe for which to gather information.
S-Series range: 0 or 1
address mac-addr (OPTIONAL) Enter the keyword address followed by a MAC address in the
nn:nn:nn:nn:nn:nn format to display information on that MAC address.
dynamic (OPTIONAL) Enter the keyword dynamic to display only those MAC
addresses learned dynamically by the switch.
static (OPTIONAL) Enter the keyword static to display only those MAC address
specifically configured on the switch.
interface interface (OPTIONAL) Enter the keyword interface followed by the interface type,
slot and port information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/port information.
• For a Port Channel interface, enter the keyword port-channel followed
by a number:
S-Series Range: 1-128
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
vlan vlan-id (OPTIONAL) Enter the keyword vlan followed by the VLAN ID to display
the MAC address assigned to the VLAN.
Range: 1 to 4094.
Version 7.6.1.0 This version of the command introduced for S-Series