Command Line Reference Guide

Layer 2 | 843
Usage
Information
This is supported on physical interfaces, static LAGs, and LACP LAGs.
Related
Commands
mac learning-limit reset
c e s
Reset the MAC address learning-limit error-disabled state.
Syntax
mac learning-limit reset
Defaults
No default behavior or values
Command Modes
EXEC
EXEC Privilege
Command
History
show cam mac linecard (count)
e
Display the CAM size and the portions allocated for MAC addresses and for MAC ACLs.
Syntax
show cam mac linecard slot port-set port-pipe count [vlan vlan-id] [interface interface]
Parameters
Version 7.8.1.0 Introduced on C-Series
Version 7.5.1.0 Introduced on E-Series
show mac learning-limit Display details of the mac learning-limit
Version 8.2.1.0 Introduced on S-Series
Version 7.7.1.0 Introduced on C-Series
Version 7.5.1.0 Introduced on E-Series
linecard slot (REQUIRED) Enter the keyword linecard followed by a slot number to select the
linecard for which to gather information.
E-Series range: 0 to 6.
port-set port-pipe (REQUIRED) Enter the keyword port-set followed by a Port-Pipe number to select
the Port-Pipe for which to gather information.
E-Series range: 0 or 1
count (REQUIRED) Enter the keyword count to display CAM usage by interface type.