Command Line Reference Guide

822 | Intermediate System to Intermediate System (IS-IS)
www.dell.com | support.dell.com
show isis graceful-restart detail
e
Display detailed IS-IS Graceful Restart related settings.
Syntax
show isis graceful-restart detail
Command Modes
EXEC
EXEC Privilege
Command
History
Example FTOS#show isis graceful-restart detail
Configured Timer Value
======================
Graceful Restart : Enabled
T3 Timer : Manual
T3 Timeout Value : 30
T2 Timeout Value : 30 (level-1), 30 (level-2)
T1 Timeout Value : 5, retry count: 1
Adjacency wait time : 30
Operational Timer Value
======================
Current Mode/State : Normal/RUNNING
T3 Time left : 0
T2 Time left : 0 (level-1), 0 (level-2)
Restart ACK rcv count : 0 (level-1), 0 (level-2)
Restart Req rcv count : 0 (level-1), 0 (level-2)
Suppress Adj rcv count : 0 (level-1), 0 (level-2)
Restart CSNP rcv count : 0 (level-1), 0 (level-2)
Database Sync count : 0 (level-1), 0 (level-2)
FTOS#
show isis hostname
e
Display IS-IS host names configured or learned on the E-Series.
Syntax
show isis hostname
Command Modes
EXEC
EXEC Privilege
P This value represents the P bit. This bit will always set be zero as Dell Force10 does
not support area partition repair.
OL This value represents the overload bit, determining congestion. If the overload bit is
set, other routers will not use this system as a transit router when calculating routes.
Table 30-82. Command Example Fields
Field Description
Version 8.3.1.0 Introduced on the E-Series