Command Line Reference Guide

820 | Intermediate System to Intermediate System (IS-IS)
www.dell.com | support.dell.com
Example 2
(address-family-ipv6
mode)
FTOS(conf-router_isis-af_ipv6)#show conf
!
address-family ipv6 unicast
maximum-paths 16
multi-topology transition
set-overload-bit
spf-interval level-1 100 15 20
spf-interval level-2 120 20 25
exit-address-family
show isis database
e
Display the IS-IS link state database.
Syntax
show isis database [level-1 | level-2] [local] [detail | summary] [lspid]
Parameters
Command Modes
EXEC
EXEC Privilege
Example FTOS#show isis database
IS-IS Level-1 Link State Database
LSPID LSP Seq Num LSP Checksum LSP Holdtime ATT/P/OL
ISIS.00-00 * 0x00000006 0xCF43 580 0/0/0
IS-IS Level-2 Link State Database
LSPID LSP Seq Num LSP Checksum LSP Holdtime ATT/P/OL
ISIS.00-00 * 0x00000006 0xCF43 580 0/0/0
!
FTOS#show isis database detail ISIS.00-00
IS-IS Level-1 Link State Database
LSPID LSP Seq Num LSP Checksum LSP Holdtime ATT/P/OL
ISIS.00-00 * 0x0000002B 0x853B 1075 0/0/0
Area Address: 49.0000.0001
NLPID: 0xCC 0x8E
IP Address: 10.1.1.1
IPv6 Address: 1011::1
Topology: IPv4 (0x00) IPv6 (0x8002)
Metric: 10 IS OSPF.00
Metric: 10 IS (MT-IPv6) OSPF.00
Metric: 10 IP 15.1.1.0 255.255.255.0
Metric: 10 IPv6 (MT-IPv6) 1511::/64
Metric: 10 IPv6 (MT-IPv6) 2511::/64
level-1
(OPTIONAL) Displays the Level 1 IS-IS link-state database.
level-2
(OPTIONAL) Displays the Level 2 IS-IS link-state database.
local
(OPTIONAL) Displays local link-state database information.
detail
(OPTIONAL) Detailed link-state database information of each LSP displays when
specified. If not specified, a summary displays.
summary
(OPTIONAL) Summary of link-state database information displays when specified.
lspid
(OPTIONAL) Display only the specified LSP.