Command Line Reference Guide

Intermediate System to Intermediate System (IS-IS) | 817
Defaults
IS-IS Level 2 routes only
Command Modes
ROUTER ISIS (for IPv4)
CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Example FTOS(conf)#router is
FTOS(conf-router_isis)#redistribute bgp 1 level-1 metric 32 metric-type
external route-map rmap-isis-to-bgp
FTOS(conf-router_bgp)#show running-config isis
!
router isis
redistribute bgp 1 level-1 metric 32 metric-type external route-map
rmap-isis-to-bgp
Command
History
Usage
Information
BGP to IS-IS redistribution supports “match” options using route maps. The metric value, level, and
metric-type of redistributed routes can be set by the redistribution command. More advanced “set”
options can be performed using route maps.
redistribute ospf
e
Redistribute routing information from an OSPF process.
Syntax
redistribute ospf process-id [level-1| level-1-2 | level-2] [match {internal | external}] [metric
metric-value] [metric-type {external | internal}] [route-map map-name]
To return to the default values, enter the no redistribute ospf process-id [level-1| level-1-2 | level-2]
[match {internal | external}] [metric metric-value][metric-type {external | internal}] [route-map
map-name] command.
Parameters
Version 7.5.1.0 Introduced IPv6 ISIS support
Version 6.3.1.0 Introduced
process-id
Enter a number that corresponds to the OSPF process ID to be redistributed.
Range: 1 to 65355
metric metric-value
(OPTIONAL) The value used for the redistributed route. You should use a metric
value that is consistent with the destination protocol.
Range: 0 to 16777215
Default: 0.
metric-type {external |
internal}
(OPTIONAL) The external link type associated with the default route advertised
into a routing domain. The two options are:
• external
• internal
level-1
(OPTIONAL) Routes are independently redistributed into IS-IS as Level 1 routes.
level-1-2
(OPTIONAL) Routes are independently redistributed into IS-IS as Level-1-2
routes.
level-2
(OPTIONAL) Routes are independently redistributed into IS-IS as Level 2 routes.
This is the default.