Command Line Reference Guide

792 | Intermediate System to Intermediate System (IS-IS)
www.dell.com | support.dell.com
debug isis adj-packets
e
Enable debugging on adjacency-related activity such as hello packets that are sent and received on
IS-IS adjacencies.
Syntax
debug isis adj-packets [interface]
To turn off debugging, use the no debug isis adj-packets [interface] command.
Parameters
Command Modes
EXEC Privilege
debug isis local-updates
e
Enables debugging on a specific interface and provides diagnostic information to debug IS-IS local
update packets.
Syntax
debug isis local-updates [interface]
To turn off debugging, enter the no debug isis local-updates [interface] command.
Parameters
Command Modes
EXEC Privilege
interface
(OPTIONAL) Identifies the interface type slot/port as one of the following:
• For a Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the
slot/port information.
• For a Port Channel interface, enter the keyword
port-channel followed by a number:
C-Series and S-Series Range: 1-128
E-Series Range: 1 to 255 for TeraScale and 1 to 512 for ExaScale.
• For a SONET interface, enter the keyword
sonet followed by the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed
by the slot/port information.
• For a VLAN, enter the keyword vlan followed by a number from 1 to 4094.
interface
(OPTIONAL) Identifies the interface type slot/port as one of the following:
• For a Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the
slot/port information.
• For a Port Channel interface, enter the keyword
port-channel followed by a number:
C-Series and S-Series Range: 1-128
E-Series Range: 1 to 255 for TeraScale and 1 to 512 for ExaScale.
• For a SONET interface, enter the keyword
sonet followed by the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed
by the slot/port information.
• For a VLAN, enter the keyword
vlan followed by a number from 1 to 4094.