Command Line Reference Guide

IPv6 Border Gateway Protocol (IPv6 BGP) | 785
Neighbor Displays the BGP neighbor address.
AS Displays the AS number of the neighbor.
MsgRcvd Displays the number of BGP messages that neighbor received.
MsgSent Displays the number of BGP messages that neighbor sent.
TblVer Displays the version of the BGP table that was sent to that neighbor.
InQ Displays the number of messages from that neighbor waiting to be processed.
OutQ Displays the number of messages waiting to be sent to that neighbor.
If a number appears in parentheses, the number represents the number of
messages waiting to be sent to the peer group.
Up/Down Displays the amount of time (in hours:minutes:seconds) that the neighbor is in
the Established stage.
If the neighbor has never moved into the Established stage, the word never is
displayed.
State/Pfx If the neighbor is in Established stage, the number of network prefixes received.
If a maximum limit was configured with the neighbor maximum-prefix
command, (prfxd) appears in this column.
If the neighbor is not in Established stage, the current stage is displayed (Idle,
Connect, Active, OpenSent, OpenConfirm) When the peer is transitioning
between states and clearing the routes received, the phrase (Purging) may appear
in this column.
If the neighbor is disabled, the phrase (Admin shut) appears in this column.
Table 29-81. show ip bgp summary Command Fields
Field Description