Command Line Reference Guide

76 | Control and Monitoring
www.dell.com | support.dell.com
audible cut-off
e
Turn off an audible alarm.
Syntax
audible cut-off
Defaults
Not configured.
Command Modes
EXEC Privilege
banner exec
c e s
Configure a message that is displayed when a user enters the EXEC mode.
Syntax
banner exec c line c
Parameters
Defaults
No banner is displayed.
Command Modes
CONFIGURATION
Command
History
ip tftp source-interface telnet
line telnet-peer-rpm
linecard terminal length
module power-off terminal xml
motd-banner traceroute
ping undebug all
power-off util-threshold cpu (C- and E-Series)
power-on util-threshold cpu (S-Series)
reload util-threshold mem (C- and E-Series)
reset util-threshold mem (S-Series)
rpm <slot> location-led upload trace-log
send virtual-ip
service timestamps write
show alarms
c Enter the keywords banner exec, and then enter a character delineator, represented here by
the letter
c, and press ENTER.
line
Enter a text string for your banner message ending the message with your delineator.
In the example below, the delineator is a percent character (%); the banner message is
“testing, testing”.
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Introduced on S-Series