Command Line Reference Guide

IPv6 Border Gateway Protocol (IPv6 BGP) | 749
show ip bgp ipv6 unicast
c e s
View the current BGP routing table for the E-Series.
Syntax
show ip bgp ipv6 unicast [network [network-mask] [longer-prefixes]]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Usage
Information
When you enable bgp non-deterministic-med command, the show ip bgp command output for a
BGP route does not list the INACTIVE reason.
show ip bgp ipv6 unicast cluster-list
c e s
View BGP neighbors in a specific cluster.
Syntax
show ip bgp ipv6 unicast cluster-list [cluster-id]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
network
(OPTIONAL) Enter the network address (in dotted decimal format) of the BGP
network to view information only on that network.
network-mask
(OPTIONAL) Enter the network mask (in slash prefix format) of the BGP network
address.
longer-prefixes (OPTIONAL) Enter the keyword longer-prefixes to view all routes with a
common prefix.
Version 8.4.2.1 Introduced on C-Series and S-Series.
Version 8.2.1.0 Introduced on E-Series ExaScale
Version 7.4.1.0 Introduced on E-Series TeraScale
cluster-id
(OPTIONAL) Enter the cluster id in dotted decimal format.
Version 8.4.2.1 Introduced on C-Series and S-Series.
Version 8.2.1.0 Introduced on E-Series ExaScale
Version 7.4.1.0 Introduced on E-Series TeraScale