Command Line Reference Guide

722 | IPv6 Border Gateway Protocol (IPv6 BGP)
www.dell.com | support.dell.com
debug ip bgp events
c e s
Allows you to view information on local BGP state changes and other BGP events.
Syntax
debug ip bgp [ipv6-address | peer-group peer-group-name] events [in | out]
To disable debugging, use the no debug ip bgp ipv6-address | peer-group peer-group-name]
events command.
Parameters
Command Modes
EXEC Privilege
Command
History
Usage
Information
Enter the no debug ip bgp command to remove all configured debug commands for BGP.
debug ip bgp ipv6 dampening
c e s
View information on IPv6 routes being dampened.
Syntax
debug ip bgp ipv6 unicast dampening [in | out]
To disable debugging, enter no debug ip bgp ipv6 unicast dampening.
Parameters
Command Modes
EXEC Privilege
Command
History
Usage
Information
Enter no debug ip bgp command to remove all configured debug commands for BGP.
Related
Commands
ipv6-address (OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format followed by the prefix
length in the
/x format.
Range: /0 to /128
The :: notation specifies successive hexadecimal fields of zeros.
peer-group
peer-group-name
(OPTIONAL) Enter the keyword peer-group followed by the name of the peer group.
in (OPTIONAL) Enter the keyword in to view only events on inbound BGP messages.
out (OPTIONAL) Enter the keyword out to view only events on outbound BGP messages.
Version 8.4.2.1 Introduced on C-Series and S-Series.
Version 8.2.1.0 Introduced on E-Series ExaScale
Version 7.4.1.0 Introduced on E-Series TeraScale
in (OPTIONAL) Enter the keyword in to view only inbound dampened routes.
out (OPTIONAL) Enter the keyword out to view only outbound dampened routes.
Version 8.4.2.1 Introduced on C-Series and S-Series.
Version 8.2.1.0 Introduced on E-Series ExaScale
Version 7.4.1.0 Introduced on E-Series TeraScale
show ip bgp ipv6 unicast dampened-paths View BGP dampened routes.