Command Line Reference Guide

72 | BOOT_USER Mode
www.dell.com | support.dell.com
show boot selection
c e
Display the current FTOS boot image.
Syntax
show boot selection
Command Modes
BOOT_USER
Example BOOT_USER # show boot selection
ROM BOOTSTRAP SELECTOR PARMETERS:
================================
Current ROM bootstrap selection set to Bootflash partition B.
Last ROM bootstrap occurred from Bootflash partition B.
BOOT_USER #
Related
Commands
show bootflash
c e
Display information on the boot flash.
Syntax
show bootflash
Command Modes
BOOT_USER
Example BOOT_USER # show bootflash
GENERAL BOOTFLASH INFO
======================
Bootflash Partition A:
Dell Force10 Networks System Boot
Copyright 1999-2011 Dell Inc.
ROM Header Version 1.0
Engineering CP_IMG_BOOT, BSP Release 2.0.0.19, Checksum 0x39303030
Created Mon Mar 20 10:56:53 US/Pacific 2004 by xxx on Unknown host
Bootflash Partition B:
Dell Force10 Networks System Boot
Copyright 1999-2011 Dell Inc.
ROM Header Version 1.0
Engineering CP_IMG_BOOT, BSP Release 2.0.0.19, Checksum 0x36313031
Created Mon Mar 6 18:15:10 2004 by xxx on hostname
Boot Selector Partition:
Dell Force10 Networks System Boot
Copyright 1999-2011 Dell Inc.
ROM Header Version 1.0
Official CP_IMG_BOOT_SELECTOR, BSP Release 2.0.0.15, Checksum 0x30314348
Created Mon Jan 21 17:15:47 US/Pacific 2004 by xxx on Unknown host
BOOT_USER #
boot change
Change the primary, secondary or default boot image configuration
boot selection
Change the boot flash image on the internal Flash.