Command Line Reference Guide

IPv6 Border Gateway Protocol (IPv6 BGP) | 719
clear ip bgp peer-group
c e s
Reset a peer-group’s BGP sessions.
Syntax
clear ip bgp peer-group peer-group-name
Parameters
Command Modes
EXEC Privilege
Command
History
clear ip bgp ipv6 dampening
c e s
Clear information on route dampening and return suppressed route to active state.
Syntax
clear ip bgp ipv6 unicast dampening [ipv6-address]
Parameters
Command Modes
EXEC Privilege
Command
History
Usage
Information
After you enter this command, the software deletes history routes and returns suppressed routes to
active state.
clear ip bgp ipv6 flap-statistics
c e s
Clear BGP flap statistics, which includes number of flaps and the time of the last flap.
Syntax
clear ip bgp ipv6 unicast flap-statistics [ipv6-address | filter-list as-path-name | regexp
regular-expression]
Parameters
peer-group-name
Enter the peer group name to reset the BGP sessions within that peer group.
Version 8.4.2.1 Introduced on C-Series and S-Series.
Version 8.2.1.0 Introduced on E-Series ExaScale
Version 7.4.1.0 Introduced on E-Series TeraScale
ipv6-address Enter the IPv6 address in the x:x:x:x::x format followed by the prefix length in
the
/x format.
Range: /0 to /128
The :: notation specifies successive hexadecimal fields of zeros
Version 8.4.2.1 Introduced on C-Series and S-Series.
Version 8.2.1.0 Introduced on E-Series ExaScale
Version 7.4.1.0 Introduced on E-Series TeraScale
ipv6-address (OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format followed
by the prefix length in the
/x format.
Range: /0 to /128
The :: notation specifies successive hexadecimal fields of zeros