Command Line Reference Guide

718 | IPv6 Border Gateway Protocol (IPv6 BGP)
www.dell.com | support.dell.com
Command Modes
EXEC Privilege
Command
History
clear ip bgp ipv6-address
c e s
Reset BGP sessions specific to an IPv6 address on the E-Series. The soft parameter (BGP Soft
Reconfiguration) clears the policies without resetting the TCP connection.
Syntax
clear ip bgp ipv6-address [flap-statistics | ipv4 {multicast {flap-statistics | soft {in | out}} | unicast
{flap-statistics | soft {in | out}} | ipv6 unicast {flap-statistics | soft {in | out}| soft [in | out]
Parameters
Command Modes
EXEC Privilege
Command
History
soft (OPTIONAL) Enter the keyword soft to configure and activate policies without
resetting the BGP TCP session, that is, BGP Soft Reconfiguration.
Note: If you enter clear ip bgp ipv6-address soft, both inbound and
outbound policies are reset.
in (OPTIONAL) Enter the keyword in to activate only inbound policies.
out (OPTIONAL) Enter the keyword out to activate only outbound policies.
Version 8.4.2.1 Introduced on C-Series and S-Series.
Version 8.2.1.0 Introduced on E-Series ExaScale
Version 7.4.1.0 Introduced on E-Series TeraScale
ipv6-address
Enter an IPv6 address to reset neighbors belonging to that IP. Used without a qualifier,
the keyword resets all neighbors belonging to that IP.
flap-statistics (OPTIONAL) Enter the keyword flap-statistics to clear all flap statistics belonging to
that AS or a specified address family within that IP.
ipv4 (OPTIONAL) Enter the keyword ipv4 to select options for that address family.
ipv6 (OPTIONAL) Enter the keyword ipv6 to select options for that address family.
unicast (OPTIONAL) Enter the keyword unicast to select the unicast option within the selected
address family.
multicast (OPTIONAL) Enter the keyword multicast to select the multicast option within the
selected address family.
Multicast is supported on IPv4 only
soft (OPTIONAL) Enter the keyword soft to configure and activate policies without resetting
the BGP TCP session, that is, BGP Soft Reconfiguration.
Note: If you enter
clear ip bgp ip6-address soft, both inbound and outbound
policies are reset.
in (OPTIONAL) Enter the keyword in to activate only inbound policies.
out (OPTIONAL) Enter the keyword out to activate only outbound policies.
Version 8.4.2.1 Introduced on C-Series and S-Series.
Version 8.2.1.0 Introduced on E-Series ExaScale
Version 7.4.1.0 Introduced on E-Series TeraScale