Command Line Reference Guide

692 | IPv6 Basics
www.dell.com | support.dell.com
[ 0] 2002:44:1:20::11 - Gi 0/0 0 1
[ 0] 2002:44:1:19::11 - Gi 0/0 0 1
FTOS#
Example 2
FTOS#show ipv6 cam linecard 1 port-set 0
Neighbor Mac-Addr Port VId
--------------------------------------------------- ----------------- --------- ----
[ 0] fe80::201:e8ff:fe17:5cae 00:01:e8:17:5c:ae BLK 100
[ 1] fe80::201:e8ff:fe17:5bbe 00:01:e8:17:5b:be BLK 0
[ 2] fe80::201:e8ff:fe17:5bbd 00:01:e8:17:5b:bd BLK 0
[ 3] fe80::201:e8ff:fe17:5cb0 00:01:e8:17:5c:b0 BLK 0
[ 4] fe80::201:e8ff:fe17:5cae 00:01:e8:17:5c:ae BLK 1000
[ 5] fe80::201:e8ff:fe17:5caf 00:01:e8:17:5c:af BLK 0
Prefix First-Hop Mac-Addr Port VId EC
------------------------------------ ------------------------ ----------------- --------- --
[ 80] 2222::2/128 [ 2] : 00:00:00:00:00:00 RP2 0 0
[ 81] 3333::2/128 [ 2] ::1 00:00:00:00:00:00 RP2 0 0
FTOS#
show ipv6 cam stack-unit
c e s
Displays the IPv6 CAM entries for the specified stack-unit.
Syntax
show ipv6 cam stack-unit unit-number port-set {0-1} [summary | index | ipv6 address]
Parameters
Defaults
No default values or behavior
Command Modes
EXEC
EXEC Privilege
Command
History
unit-number
Enter the stack unit’s ID number.
Range: 0 to 7
port-set Enter the keyword port-set followed by the port-pipe number.
Range: 0 to 1
summary
(OPTIONAL) Enter the keyword
summary to display a table listing network
prefixes and the total number prefixes which can be entered into the IPv6 CAM.
index (OPTIONAL) Enter the index in the IPv6 CAM
ipv6-address
Enter the IPv6 address in the
x:x:x:x::x/n format to display networks that have
more specific prefixes.
Range: /0 to /128
Note: The
:: notation specifies successive hexadecimal fields of zeros.
Version 8.4.2.1 Introduced on C-Series and S-Series
Version 7.8.1.0 Introduced on E-Series TeraScale