Command Line Reference Guide

IPv6 Basics | 685
28
IPv6 Basics
Overview
IPv6 Basic Commands are supported on platforms: c e s
Commands
The IPv6 commands in the chapter are:
• clear ipv6 fib
• clear ipv6 route
• ipv6 address
• ipv6 host
• ipv6 nd prefix-advertisement
• ipv6 route
• ipv6 unicast-routing
• show ipv6 cam linecard
• show ipv6 cam stack-unit
• show ipv6 fib linecard
• show ipv6 fib stack-unit
• show ipv6 interface
• show ipv6 route
• trust ipv6-diffserv
clear ipv6 fib
c e s
Clear (refresh) all FIB entries on a linecard.
Syntax
clear ipv6 fib linecard slot
Parameters
Command Mode
EXEC Privilege
Command
History
Note: Basic IPv6 basic commands are supported on all platforms. Table 25-2, "FTOS and IPv6 Feature
Support," in IPv6 Addressing in the Configuration Guide for information on the FTOS version and
platform that supports IPv6 in each software feature.
slot
Enter the slot number to clear the FIB for a linecard.
Version 8.2.1.0 Introduced on E-Series ExaScale
Version 7.8.1.0 Introduced on C-Series and S-Series
Version 7.4.1.0 Introduced on E-Series TeraScale