Command Line Reference Guide

646 | IPv4 Routing
www.dell.com | support.dell.com
Address : 20.20.20.2
Filter-list in : foo
Route-map in : foo
Weight : 0
Address : 5::6
Weight : 0
FTOS#
show ip route
c e s
View information, including how they were learned, about the IP routes on the switch.
Syntax
show ip route [vrf [vrf name] hostname | ip-address [mask] [longer-prefixes] | list prefix-list |
protocol [process-id | routing-tag] | all | connected | static | summary]
Parameter
Command Modes
EXEC
EXEC Privilege
Command
History
vrf name
E-Series Only: Clear only the route entries tied to the VRF process.
ip-address
(OPTIONAL) Specify a name of a device or the IP address of the device to view more
detailed information about the route.
mask
(OPTIONAL) Specify the network mask of the route. Use this parameter with the IP
address parameter.
longer-prefixes (OPTIONAL) Enter the keyword longer-prefixes to view all routes with a common
prefix.
list prefix-list (OPTIONAL) Enter the keyword list and the name of a configured prefix list. Refer to
show ip route list.
protocol (OPTIONAL) Enter the name of a routing protocol (bgp, isis, ospf, rip) or the
keywords
connected or static.
bgp, isis, ospf, rip are E-Series-only options.
If you enter bgp, you can include the BGP as-number. (E-Series only)
If you enter
isis, you can include the ISIS routing-tag. (E-Series only)
If you enter
ospf, you can include the OSPF process-id.
process-id
(OPTIONAL) Specify that only OSPF routes with a certain process ID must be
displayed.
routing-tag
(OPTIONAL) Specify that only ISIS routes with a certain routing tag must be displayed.
connected (OPTIONAL) Enter the keyword connected to view only the directly connected routes.
all (OPTIONAL) Enter the keyword all to view both active and non-active routes.
static (OPTIONAL) Enter the keyword static to view only routes configured by the ip route
command.
summary (OPTIONAL) Enter the keyword summary. Refer to show ip route summary.
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.9.1.0 Introduced VRF on the E-Series
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.1.1.0 Introduced for E-Series