Command Line Reference Guide

632 | IPv4 Routing
www.dell.com | support.dell.com
Command Modes
EXEC Privilege
Command
History
Usage
Information
The following example shows two VLANs that are associated with a private VLAN (PVLAN) (refer to
Chapter 47, Private VLAN (PVLAN)), a feature added for C-Series and S-Series in FTOS 7.8.1.0.
Example 1
(partial)
FTOS>show arp
Protocol Address Age(min) Hardware Address Interface VLAN CPU
----------------------------------------------------------------------------
Internet 192.2.1.254 1 00:00:c0:02:01:02 Gi 9/13 - CP
Internet 192.2.1.253 1 00:00:c0:02:01:02 Gi 9/13 - CP
Internet 192.2.1.252 1 00:00:c0:02:01:02 Gi 9/13 - CP
Internet 192.2.1.251 1 00:00:c0:02:01:02 Gi 9/13 - CP
Internet 192.2.1.250 1 00:00:c0:02:01:02 Gi 9/13 - CP
Internet 192.2.1.251 1 00:00:c0:02:01:02 Gi 9/13 - CP
Internet 192.2.1.250 1 00:00:c0:02:01:02 Gi 9/13 - CP
Internet 192.2.1.249 1 00:00:c0:02:01:02 Gi 9/13 - CP
Internet 192.2.1.248 1 00:00:c0:02:01:02 Gi 9/13 - CP
Internet 192.2.1.247 1 00:00:c0:02:01:02 Gi 9/13 - CP
Internet 192.2.1.246 1 00:00:c0:02:01:02 Gi 9/13 - CP
interface interface
(OPTIONAL) Enter the following keywords and slot/port or number information:
• For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet
followed by the slot/port information.
• For the Management interface, enter the keyword
managementethernet
followed by the slot/port information.
• For a Port Channel interface, enter the keyword
port-channel followed by a
number:
C-Series and S-Series Range: 1-128
E-Series Range: 1 to 255 for TeraScale and 1 to 512 for ExaScale.
• For a SONET interface, enter the keyword sonet followed by the slot/port
information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
followed by the slot/port information.
• For a VLAN, enter the keyword vlan followed by a number from 1 to 4094.
ip ip-address mask (OPTIONAL) Enter the keyword ip followed by an IP address in the dotted
decimal format. Enter the optional IP address mask in the slash prefix format (/x).
macaddress
mac-address mask
(OPTIONAL) Enter the keyword macaddress followed by a MAC address in
nn:nn:nn:nn:nn:nn format. Enter the optional MAC address mask in
nn:nn:nn:nn:nn format also.
static (OPTIONAL) Enter the keyword static to view entries entered manually.
dynamic (OPTIONAL) Enter the keyword dynamic to view dynamic entries.
summary (OPTIONAL) Enter the keyword summary to view a summary of ARP entries.
Version 8.2.1.0 Support 4094 VLANs on E-Series ExaScale (prior limit was 2094)
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.9.1.0 Introduced VRF on the E-Series
Version 7.8.1.0 Augmented to display local ARP entries learned from private VLANs (PVLANs)
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.1.1.0 Introduced for E-Series