Command Line Reference Guide

60 | File Management
www.dell.com | support.dell.com
upgrade fpga-image
c
Upgrade the primary FPGA image.
Syntax
upgrade fpga-image {rpm {number | all}| linecard {number | all} [system-fpga | link-fpga] | all}
{booted | file-url}
Parameters
Defaults
None.
Command Mode
EXEC Privilege
Command
History
Example
Command example: upgrade fpga-image
FTOS#conf
FTOS(conf)# upgrade primary-fpga-flash rpm
Proceed to upgrade primary fpga flash for rpm 0 [confirm yes/no]: yes
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
FTOS#
Usage
Information
Reset the card using the power-cycle option after restoring the FPGA command.
Related
Commands
rpm number Enter rpm followed by the RPM slot number to upgrade an RPM FPGA
Range: 0-1
linecard
number
Enter linecard followed by the line card slot number to upgrade a linecard FPGA.
Range: 0-7 on the C300, 0-3 on the C150
all Enter the keyword all to upgrade all RPM and linecard FPGAs. Enter the keyword all after
the keyword
rpm to upgrade all FPGAs on all RPMs.
Enter the keyword
all after the keyword linecard to upgrade all FPGAs on all linecards.
system-fpga (OPTIONAL) Enter system-fpga to upgrade only the system FPGA on a fiber linecard.
Contact the Dell Force10 TAC before using this keyword.
link-fpga (OPTIONAL) Enter link-fpga to upgrade only the link FPGA on a fiber linecard. Contact
the Dell Force10 TAC before using this keyword.
booted
Upgrade the FPGA image using the currently running FTOS image.
file-url
Enter the following location keywords and information to upgrade the FPGA using an FTOS
image other than the one currently running:
• To specify an FTOS image on the internal flash, enter flash:// file-path/filename.
• To specify an FTOS image on an FTP server, enter
ftp://user:password@hostip/
filepath
• To specify an FTOS image on the external flash on the primary RPM, slot0://file-path/
filename
• To copy a file on a TFTP server, enter tftp://hostip/filepath/filename
Version 7.7.1.0
Renamed the
primary-fpga-flash keyword to fpga-image. Added support for
upgrading using a remote FTOS image.
Version 7.6.1.0
Added support for the all keyword
Version 7.5.1.0 Introduced on C-Series
reset
Reset a line card or RPM.
restore fpga-image
This command copies the backup FPGA image to the primary FPGA image.