Command Line Reference Guide

54 | File Management
www.dell.com | support.dell.com
S-Series Example
Command output example on an S50V: show version
FTOS#show version
FTOS Networks Real Time Operating System Software
FTOS Operating System Version: 1.0
FTOS Application Software Version: E7-8-1-13
Copyright (c) 1999-2008 by Dell Force10 Networks, Inc.
Build Time: Mon Nov 24 18:59:27 2008
Build Path: /sites/sjc/work/sw/build/build2/Release/E7-8-1/SW/SRC
FTOS uptime is 1 minute(s)
System Type: S50V
Control Processor: MPC8451E with 252739584 bytes of memory.
32M bytes of boot flash memory.
1 48-port E/FE/GE with POE (SB)
48 GigabitEthernet/IEEE 802.3 interface(s)
4 Ten GigabitEthernet/IEEE 802.3 interface(s)
FTOS#
upgrade (E-Series version)
e
Upgrade the bootflash, boot selector, or system image on a processor.
Syntax
upgrade {bootflash-image | bootselector-image | system-image} {all | linecard linecard-slot |
rpm} {booted | file-url}
Parameters
Copyright (c)... Copyright information
Build Time... Software build’s date stamp
Build Path... Location of the software build files loaded on the system
FTOS uptime is... Amount of time the system has been up
System image... Image file name
Chassis Type: Chassis type (E1200, E600, E600i, E300, C300, C150)
Control Processor:... Control processor information and amount of memory on processor.
Route Processor 1:... E-Series route processor 1 information and the amount of memory on that
processor.
Route Processor 2:... E-Series route processor 2 information and the amount of memory on that
processor.
128K bytes... Amount and type of memory on system.
1 Route Processor... Hardware configuration of the system, including the number and type of
physical interfaces available.
show version Command Fields
Lines beginning with Description
bootflash-image Enter the keyword bootflash-image to upgrade the bootflash image.
bootselector-image Enter the keyword bootselector-image to upgrade the boot selector image.
Use with TAC supervision only.