Command Line Reference Guide

52 | File Management
www.dell.com | support.dell.com
Command output
example
(show sfm all)
Switch Fabric State: up
Switch Mode: SFM3
-- Switch Fabric Modules --
Slot Status
--------------------------------------------------------------
0 active (Older version of SFM for Exascale)
1 active (Older version of SFM for Exascale)
2 active (Older version of SFM for Exascale)
3 active (Older version of SFM for Exascale)
4 not present
show startup-config
ces
Display the startup configuration.
Syntax
show startup-config
Command Modes
EXEC Privilege
Command
History
Example
Command output example (partial): show startup-config
FTOS#show startup-config
! Version 7.4.1.0
! Last configuration change at Thu Mar 29 02:16:07 2007 by default
! Startup-config last updated at Thu Mar 29 02:35:08 2007 by default
!
boot system rpm0 primary flash://FTOS-EF-7.4.1.0.bin
boot system rpm0 secondary flash://FTOS-EF-6.3.1.2.bin
boot system rpm0 default flash://FTOS-EF-6.5.1.8.bin
!
...
Related
Commands
Power Status Displays power status: absent, down, or up
Serial Num Displays the line card serial number.
Part Num Displays the line card part number.
Vendor ID Displays an internal code, which specifies the manufacturing vendor.
Date Code Displays the line card’s manufacturing date.
Country Code Displays the country of origin.
01 = USA
Table 5-5. show sfm Command Output Fields
Field Description
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
Version 7.4.1.0 Expanded to include last configuration change and start-up last updated (date and time)
and who made the change.
show running-config Display current (running) configuration.