Command Line Reference Guide

File Management | 51
show sfm
c e
View the current SFM status.
Syntax
show sfm [number [brief] | all]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
E-Series Example
(show sfm)
Command output example (Partial) on E-Series: show sfm
Switch Fabric State: up
Switch Mode: SFM3
-- SFM card 0 --
Status : active (Older version of SFM for Exascale)
Card Type : SFM3 - Switch Fabric Module
Up Time : 18 hr, 40 min
Last Restart : remote-off
Temperature : 42C
Power Status : AC
Serial Number : VC074300030
Part Number : 7520020001 Rev 03
Vendor Id : 04
Date Code : 01402006
Country Code : 01
Piece Part ID : CN-0RVY43-75412-123-0030
PPID Revision : 003
Service Tag : SVCTG00
Expr Svc Code : 628 458 860 16
FPGA : 0x0.0.3
Booting from : EEPROM0
number
Enter a number to view information on that SFM.
Range: 0 to 8.
all (OPTIONAL) Enter the keyword all to view a table with information on all present SFMs.
brief (OPTIONAL) Enter the keyword brief to view a list with SFM status.
Note: The brief option is not available on C-Series.
Version 7.5.1.0 Introduced on C-Series
E-Series original Command
Table 5-5. show sfm Command Output Fields
Field Description
Switch Fabric State: States that the Switch Fabric is up (8 SFMs are online and operating).
Status Displays the SFM’s active status.
Card Type States the type of SFM.
Up Time Displays the number of hours and minutes since the RPM’s last reboot.
Temperature Displays the temperature of the RPM.
Minor alarm status if temperature is over 65° C.