Command Line Reference Guide

502 | Force10 Service Agent
www.dell.com | support.dell.com
Example FTOS(conf-callhome-testlist-test)#test-condition message-text ?
command Enter the show command
FTOS(conf-callhome-testlist-test)#test-condition message-text command ?
WORD Enter the show command
FTOS(conf-callhome-testlist-test)#test-condition message-text command "show
interfaces gi 1/0 | display xml" ?
equal-to Keyword boolean value equal to
FTOS(conf-callhome-testlist-test)#test-condition message-text command "show
interfaces gi 1/0 | display xml" equal-to ?
string Enter the search string pattern
FTOS(conf-callhome-testlist-test)#test-condition message-text command "show
interfaces gi 1/0 | display xml" equal-to string ?
LINE Regular expression
FTOS(conf-callhome-testlist-test)#test-condition message-text command "show
interfaces gi 1/0 | display xml" equal-to string <ifAdminStatus>down</ifAd-
minStatus>
Related
Commands
test-limit
c e
Set the number of times that the test list should be executed.
Syntax
test -limit number
Parameters
Default
none. If the test-limit number is removed or not configured, there is no limit for how many times to test
for the condition.
Command Mode
conf-callhome-policy
Command
History
Related
Commands
dampen Set a delay before sampling for a test condition again after it has been
matched.
test-condition (comparing samples) Configure an action to collect and compare multiple samples of a statistic.
test-condition (comparison to a
value)
Collect a statistic and compare it to a stated value.
test-limit Set the number of times that the test list that should be executed.
number
Set the number of times the test list matches that should be attempted.
Range: 0–256
Version 7.8.1.0 Introduced on C-Series and E-Series
dampen Set a delay before sampling for a test condition again after it has been matched.
test-condition
(comparing samples)
Configure an action to collect and compare multiple samples of a statistic.
policy Create a policy with a name and enter config-callhome-policy-name mode.
policy-test-list Name a policy test list and enter the config-callhome-actionlist-name mode.
sample-rate Set the sampling interval for how often to execute the configured test condition.