Command Line Reference Guide

Force10 Service Agent | 497
show keys
c e
Display the email encryption (PGP) keys. On E-Series chassis, this command is only supported for
TeraScale cards.
Syntax
show keys
Defaults
No default behavior or values
Command Mode
CONFIGURATION (conf-callhome)
Command
History
Example FTOS(conf-callhome)#show keys
Type Bits KeyID Created Expires Algorithm Use
sec+ 768 0x64CE09D9 2005-06-27 ---------- RSA Sign & Encrypt
uid E000000003209
pub 1024 0xA8E48C2F 2004-12-08 ---------- DSS Sign & Encrypt
sub 1024 0xD832BB91 2004-12-08 ---------- Diffie-Hellman
uid FTOS
2 matching keys found
FTOS(conf-callhome)#
Related
Commands
smtp server-address
c e
Identify the local SMTP (Simple Mail Transfer Protocol) server from which FTSA email messages will
be forwarded.
Syntax
smtp server-address server-address [smtp-port port number]
To remove the SMTP address, use the no smtp server-address command. This action will disable
email messaging until you enter a new SMTP server address.
Parameters
Defaults
SMTP port = 25
Version 8.4.1.0 Added support to resolve domain names to IPv6 addresses.
Version 7.6.1.0 Introduced on C-Series
Version 6.3.1.0 Introduced for E-Series
call-home Start FTSA and Enter the FTSA mode.
encrypt Enable email encryption.
keyadd Add the server public key for encryption.
server-address server address Enter the keyword server-address followed by the SMTP
server address, such as smtp.yourco.com. The domain name you
specify can be resolved into an IPv4 or IPv6 address.
smtp-port port number Optionally, enter the keyword smtp-port followed by the SMTP
port number.
Range: 0 to 65535
Default:
25