Command Line Reference Guide

File Management | 49
show running-config
ces
Display the current configuration and display changes from the default values.
Syntax
show running-config [entity] [configured] [status]
Parameters
entity
(OPTIONAL) Enter one of the keywords listed below to display that entity’s current (non-default)
configuration. Note that, if nothing is configured for that entity, nothing is displayed and the
prompt returns:
• aaa for the current AAA configuration
•
acl for the current ACL configuration
• arp for the current static ARP configuration
•
as-path for the current AS-path configuration
•
bgp for the current BGP configuration
• boot for the current boot configuration
•
cam-profile for the current CAM profile in the configuration.
•
class-map for the current class-map configuration
• community-list for the current community-list configuration
•
fefd for the current FEFD configuration
•
ftp for the current FTP configuration
•
fvrp for the current FVRP configuration
• host for the current host configuration
•
hardware-monitor for hardware-monitor action-on-error settings
•
igmp for the current IGMP configuration
• interface for the current interface configuration
•
isis for the current ISIS configuration
•
line for the current line configuration
• load-balance for the current port-channel load-balance configuration
•
logging for the current logging configuration
•
mac for the current MAC ACL configuration
•
mac-address-table for the current MAC configuration
• management-route for the current Management port forwarding configuration
•
mroute for the current Mroutes configuration
•
ntp for the current NTP configuration
•
ospf for the current OSPF configuration
•
pim for the current PIM configuration
•
policy-map-input for the current input policy map configuration
• policy-map-output for the current output policy map configuration
•
prefix-list for the current prefix-list configuration
•
privilege for the current privilege configuration
• radius for the current RADIUS configuration
•
redirect-list for the current redirect-list configuration
•
redundancy for the current RPM redundancy configuration
• resolve for the current DNS configuration
•
rip for the current RIP configuration