Command Line Reference Guide

Force10 Service Agent | 489
log-only
c e
Execute this command if you want FTSA data to be collected in a local log rather than to be sent to
configured FTSA recipients.
Syntax
[no] log-only
Defaults
“no log-only”
Command Modes
conf-callhome-actionlist-name
Command
History
Usage
Information
If you execute this command, data gathered by the action list invoked by the default-action command
will be saved in a local file. The file will have the same name as the action list and with a time stamp
appended to the file name.
When saved in flash, the file name format is:
flash:/<actionlistName>-<timestamp>.ftsa
For example: flash:/hardwareAction- 02_16_34 423.ftsa
Because the time stamp makes each file unique, files will not be overwritten if the action list executes
more than once. If this log-only command is not executed, or if no log-only option is executed, then
the collected data will be sent in an FTSA email.
When sent as an mail attachment, the file name format is:
<actionlistName>-<timestamp>.txt
For example: hardwareAction-02_16_34 423.txt
If the collected data is split due to a size limit, a sequential version number will be added to it.
For example: hardwareAction-02_16_34 423_0.txt
Related
Commands
Version 7.7.1.0 Introduced on C-Series and E-Series
call-home Start FTSA and Enter the FTSA mode.
default-action Select the information collection action that matches the selected test group.