Command Line Reference Guide

Force10 Resilient Ring Protocol (FRRP) | 471
member-vlan
c e
Specify the member VLAN identification numbers.
Syntax
member-vlan {vlan-range}
To return to the default, use the no member-vlan [vlan-range] command.
Parameters
Defaults
No default values or behavior
Command Modes
CONFIGURATION (conf-frrp)
Command
History
mode
c e
Set the Master or Transit mode of the ring.
Syntax
mode {master | transit}
To reset the mode, use the no mode {master | transit} command.
Parameters
Defaults
Mode None
Command Modes
CONFIGURATION (conf-frrp)
Command
History
protocol frrp
c e
Enter the Resilient Ring Protocol and designate a ring identification.
Syntax
protocol frrp {ring-id}
To exit the ring protocol, use the no protocol frrp {ring-id} command.
Parameters
vlan-range
Enter the member VLANs using comma separated VLAN IDs, a range of VLAN IDs, a
single VLAN ID, or a combination. For example:
Comma separated: 3, 4, 6
Range: 5-10
Combination: 3, 4, 5-10, 8
Version 8.2.1.0 Introduced for the C-Series
Version 7.4.1.0 Introduced
master Enter the keyword master to set the Ring node to Master mode.
transit Enter the keyword transit to set the Ring node to Transit mode.
Version 8.2.1.0 Introduced for the C-Series
Version 7.4.1.0 Introduced
ring-id
Enter the ring identification number.
Range: 1 to 255