Command Line Reference Guide

Force10 Resilient Ring Protocol (FRRP) | 469
Defaults
Disabled
Command Modes
CONFIGURATION (conf-frrp)
Command
History
Usage
Information
Since the Resilient Ring Protocol can potentially transmit 20 packets per interface, debug information
must be restricted.
description
c e
Enter an identifying description of the ring.
Syntax
description Word
To remove the ring description, use the no description [Word] command.
Parameters
Defaults
No default values or behavior
Command Modes
CONFIGURATION (conf-frrp)
Command
History
disable
c e
Disable the Resilient Ring Protocol.
Syntax
disable
To enable the Resilient Ring Protocol, use the no disable command.
Defaults
Disabled
Command Modes
CONFIGURATION (conf-frrp)
Command
History
ring-id
(Optional) Enter the ring identification number.
Range: 1 to 255
count
number
Enter the keyword count followed by the number of debug outputs.
Range: 1 to 65534
Version 8.2.1.0 Introduced for the C-Series
Version 7.4.1.0 Introduced
Word
Enter a description of the ring.
Maximum: 255 characters
Version 8.2.1.0 Introduced for the C-Series
Version 7.4.1.0 Introduced
Version 8.2.1.0 Introduced for the C-Series
Version 7.4.1.0 Introduced