Command Line Reference Guide

Dynamic Host Configuration Protocol (DHCP) | 445
Command
History
host
c s
For manual (rather than automatic) configurations, assign a host to a single-address pool.
Syntax
host address
Parameters
Command Mode
DHCP <POOL>
Default
None
Command
History
lease
c s
Specify a lease time for the addresses in a pool.
Syntax
lease {days [hours] [minutes] | infinite}
Parameters
Command Mode
DHCP <POOL>
Default
24 hours
Command
History
Version 8.2.1.0 Introduced on C-Series and S-Series.
address/mask
Enter the host IP address and subnet mask.
Version 8.2.1.0 Introduced on C-Series and S-Series.
days
Enter the number of days of the lease.
Range: 0-31
hours
Enter the number of hours of the lease.
Range: 0-23
minutes
Enter the number of minutes of the lease.
Range: 0-59
infinite
Specify that the lease never expires.
Version 8.2.1.0 Introduced on C-Series and S-Series.