Command Line Reference Guide

44 | File Management
www.dell.com | support.dell.com
RP2 DOWNLOAD BOOT invalid invalid
linecard 0 is not present.
linecard 1 DOWNLOAD BOOT invalid invalid
linecard 2 DOWNLOAD BOOT 4.7.5.387 6.5.1.8
linecard 3 DOWNLOAD BOOT invalid invalid
linecard 4 DOWNLOAD BOOT invalid invalid
linecard 5 is not present.
Peer RPM:
=============================================
Type Boot Type A B
----------------------------------------------------------------
CP DOWNLOAD BOOT invalid invalid
RP1 DOWNLOAD BOOT invalid invalid
RP2 DOWNLOAD BOOT invalid invalid
show bootvar
c e
Display the variable settings for the E-Series boot parameters.
Syntax
show bootvar
Command Modes
EXEC Privilege
Command
History
Example
Command Output example: show bootvar
FTOS#show bootvar
PRIMARY IMAGE FILE = ftp://box:password@10.31.1.205//home/5.3.1/5.3.1.0/
FTOS-ED-RPM1-5.3.1.0.bin
SECONDARY IMAGE FILE = variable does not exist
DEFAULT IMAGE FILE = flash://FTOS-ED-5.3.1.0.bin
LOCAL CONFIG FILE = variable does not exist
PRIMARY HOST CONFIG FILE = variable does not exist
SECONDARY HOST CONFIG FILE = variable does not exist
PRIMARY NETWORK CONFIG FILE = variable does not exist
SECONDARY NETWORK CONFIG FILE = variable does not exist
CURRENT IMAGE FILE = ftp://box:password@10.31.1.205//home/5.3.1/5.3.1.0/
FTOS-ED-RPM1-5.3.1.0.bin
CURRENT CONFIG FILE 1 = flash://startup-config
CURRENT CONFIG FILE 2 = variable does not exist
CONFIG LOAD PREFERENCE = local first
BOOT INTERFACE GATEWAY IP ADDRESS = variable does not exist
FTOS#
Related
Commands
Version 7.5.1.0 Introduced on C-Series
E-Series original Command
boot config Set the location of configuration files on local devices.
boot host Set the location of configuration files from the remote host.
boot network Set the location of configuration files from a remote network.