Command Line Reference Guide

434 | Configuration Rollback
www.dell.com | support.dell.com
configure confirm
c e
Confirm the replacement of the running configuration when time option is used with the configure
replace command.
Syntax
configure confirm
Defaults
No default values or behavior
Command Modes
EXEC Privilege
Command
History
Related
Commands
configure replace
c e
Replace the running configuration with a specified file.
Syntax
configure replace {flash://filepath | startup-config [force | time seconds]}
Parameters
Defaults
No default values or behavior
Command Modes
EXEC Privilege
Command
History
configure terminal
c e
Enter the exclusive configuration mode when the confutation mode is set to manual.
Syntax
configure terminal [lock]
To undo the lock, use the exit command.
Parameters
Version 7.6.1.0 Introduced on C-Series and E-Series
show archive Display the archive
flash://filepath Enter the path flash:.// followed by the file path of the local file system to
copy your file to the local location.
startup-config force Enter the keyword startup-config to replace with the startup configuration
and force the replacement without confirmation.
force Enter the keyword force to replace the startup configuration without
confirmation.
time seconds Enter the keyword time to replace with the startup configuration and
designate the time with which you have to confirm the replacement of the
running configuration.
Range: 60 to 1800 seconds
Version 7.6.1.0 Introduced on C-Series and E-Series
lock (OPTIONAL) Enter the keyword lock to lock the confirmation in an exclusive mode.