Command Line Reference Guide

428 | Content Addressable Memory (CAM)
www.dell.com | support.dell.com
Multicast Fib/Acl : 9K 12K
Pbr : 1K 1K
Qos : 8K 8K
System Flow : 5K 5K
Trace Lists : 1K 1K
-- Line card 8 --
Current Settings Next Boot
Acl : 5K 0K
Multicast Fib/Acl : 9K 12K
Pbr : 1K 1K
Qos : 8K 8K
System Flow : 5K 5K
Trace Lists : 1K 1K
-- Line card 13 --
Current Settings Next Boot
Acl : 5K 0K
Multicast Fib/Acl : 9K 12K
Pbr : 1K 1K
Qos : 8K 8K
System Flow : 5K 5K
Trace Lists : 1K 1K
FTOS#
Usage
Information
If the IPv4Flow sub-region has been changed, this command displays the current IPv4Flow
configuration in one column and in the other column displays the IPv4Flow configuration that will be
loaded after the next reboot.
Related
Commands
CAM Layer 2 ACL Commands
IPv4Flow sub-partitions are supported on the E-Series TeraScale platform e
t
The CAM Layer 2 ACL commands are:
• cam l2acl (EXEC Privilege)
• cam-l2acl (CONFIGURATION)
• show cam-l2acl
The 18-megabit user configurable CAM is divided into multiple regions such as Layer 2 FIB, Layer 3
FIB, IPv4Flow, IPv4 Ingress ACL, etc. The Layer 2 ACL region is further sub-divided into 6 regions:
Sysflow, L2ACL, PVST, QoS, L2PT, FRRP.
You can change the amount of CAM space, in percentage, allocated to each sub-region. The amount of
space that you can distribute to the sub-partitions is equal to the amount of CAM space that the selected
CAM profile allocates to the Layer 2 ACL partition. FTOS requires that you specify the amount of
CAM space for all sub-partitions and that the sum of all sub-partitions is 100%.
Like CAM profiles, you can configure the Layer 2 ACL partition from EXEC Privilege mode or
CONFIGURATION mode.
cam-ipv4flow
(CONFIGURATION)
Configure the amount of CAM space in IPv4flow sub-regions.